Skip to Content
OperationsOperator forms

Operator forms

A form is what an operator fills in on the operator screen, next to the list of stops: a production report with the good and scrap quantities, or a short check. You build it once and put it on one or more workplaces. Every entry is stored with the workplace, the operator, the version of the form and the period it covers.

Build a form

Open the Forms page

Go to the Forms page, in the OEE group of the menu.

Create it

Click:

Give it a name, for example Production report. The form opens in the builder.

Add fields

Click Add field and pick its type:

  • Number — a quantity or a value. Give it a Unit (pcs, kg), and a Meaning when it is the good quantity or the scrap.
  • Choice — a question with fixed answers, for example Line clear with Yes and No. An entry stores the answer, not its text, so you can rename an answer later without changing old entries.
  • Measurement — a measured value with a Lower limit, an Upper limit (one of them or both), an optional Target and 1 to 10 Samples. The operator types a value per sample; a sample outside the limits turns red as it is typed.
  • Check — a large yes/no toggle. With Must be yes, a no fails the entry.
  • Text — a remark of at most the number of characters you set (up to 500).
  • Reason — the operator picks a reason from a reason tree with the same tiles as for a stop.
  • Lines — rows of a quantity and a reason, up to 20, added with + Line: 12 scratches and 3 dents in one entry. With the meaning Scrap, the total of the quantities is the scrap of the entry.
  • Article — the operator searches an article by name or article code. A workplace whose Article source is this field makes that article from the entry on, at the article’s norm.

Each meaning (good quantity, scrap) can be on one field of the form only. Switch on Required for the fields the operator must fill in. Show only when shows a field only while a choice or check above it has a given answer, for example a remark when Clean is no; a field that is not shown is not required and not stored. The builder saves while you type; the Tablet preview shows the form as the operator sees it.

Publish

Click:

The operator screen only shows a published form. The badge next to the title says what the tablet shows: Published v1, or Draft v2 · v1 published when you changed the form after publishing it.

Changing a published form

A change after publishing makes a new draft version; the tablet keeps showing the published version until you publish again. A form that is open on a tablet while you publish is loaded again when the operator saves it, with what was typed kept: the entry follows the version just published. Once a field is published, it keeps its type: a number stays a number. You can still rename it, change its unit or answers, or remove it from the next version; the entries made with it keep their values.

Pass or fail

A form with a measurement or a check that must be yes gives an entry a verdict: it fails when a sample is outside its limits or such a check is no, and passes otherwise. An entry in which none of them was filled in has no verdict, so a check nobody answered never passes. A new check or measurement is required; switch that off only for a check that may be skipped. A correction decides again. The Recent entries on the tablet mark a failed entry Fail; the Registrations page shows Passed or Failed.

When a check fails

Such a form has the card When a check fails in the builder:

  • Add action — what the operator did, for example Blocked or Adjusted. As soon as a value fails, the tablet shows these as tiles and does not save the entry until one is picked.
  • A remark is required — a failing entry needs a remark.
  • Follow up — a failing entry stays open until someone closes it. Open entries show under To do on the operator screens of their workplace, read only. Close one on the Registrations page: pick Open follow-up under Checks, then Close follow-up in the row’s menu, with what was done. Editors and admins can close a follow-up.

Sign-off with a PIN

Switch on Operators sign each entry and correction with their PIN in the builder for a check that must be traceable to a person. On the tablet the operator picks their name at the top of the screen as usual, and the form asks for their PIN before it saves; a correction asks for the PIN of the operator who corrects. The PIN says who stood at the tablet for that entry; it does not sign in.

  • An editor or admin sets the PIN per operator under Operator names.
  • A form with sign-off cannot be filled in on a screen without operator names, or by an operator without a PIN. The tablet greys the form out with the reason, and the builder shows it next to the workplace.
  • Five wrong PINs for one name within five minutes block that name for five minutes. Twenty wrong PINs within a day block it until the day has passed or an editor or admin sets a new PIN.

Put a form on workplaces

In the Workplaces card of the builder, pick a workplace in Add a workplace. Every operator screen that shows that workplace now shows the form.

Next to each workplace is a field in minutes, which reads When needed while it is empty:

  • Minutes — the form is due that many minutes after the previous entry on that workplace, for example 60 for an hourly report. The screen marks it Due.
  • Minutes and a time — the form is due at that time and every so many minutes after it on the clock, for example 07:45 with 120 minutes: at 07:45, 09:45, 11:45 and so on, each day again from 07:45. An entry made after one of those times clears it until the next.
  • Empty or 0 — When needed: the operator opens the form when needed.

Report at the end of every roster block asks for an entry when a block of the workplace’s roster ends, such as a shift. The tablet then opens the form by itself and keeps it open until it is saved: the entry covers the time up to the end of that block, also when it is saved a little later. Nothing produced fills in zero for the numbers. A block end of more than 24 hours ago is no longer asked for.

A form about an event

About in the builder says what an entry is about: The workplace, or an operation tag of the workplace such as Orders (the order that runs) or State (a standstill). A form about orders is a production report per order, or a first-piece check. It can only be put on workplaces that have that tag (see Orders). Instead of the block report, such a form has Report when it starts and Report when it ends: an order cannot be started, or stopped, on the tablet without its report, and for a standstill the tablet asks for it by itself.

On the tablet the operator picks what the entry is about: the order or standstill that runs, or one that ended in the last 24 hours. The first entry about it covers the time since it started, the next ones the time since the previous one; an entry about something that ended stops at its end.

The trash icon takes the form off the workplace. Its entries stay, and when you put it back the history continues where it was. A form that a workplace takes its good, scrap or article from (see Where it comes from) cannot be taken off that workplace or deleted: pick another source there first.

Filling in on the tablet

The operator taps the form in the Forms column of the operator screen, fills in the fields and taps Save. The top of the form says what the entry covers, for example Covers since 06:10.

An entry covers the time since the previous entry on the same workplace; the first entry ever covers the time since the start of that day. So 480 good pieces at 14:00 after an entry at 06:00 are the pieces made between 06:00 and 14:00. Totals per day count an entry on the day it was saved.

💡

When the connection drops while saving, or the server does not answer within 15 seconds, the form stays open with Not confirmed and Try again. The entry may have arrived already: trying again sends the same entry, with the time it was first saved, and it is never counted twice. An entry tried again more than five minutes after it was first saved gets the server’s time as its end.

Correcting and undoing

The Recent entries under the forms show the entries of the last 7 days. Entries of the last 24 hours have two buttons:

  • Correct — opens the entry with its values; save the right ones. The entry keeps its period; who corrected it is kept next to who entered it. Only entries made on the version of the form the tablet shows now can be corrected; an entry made before the last publish can only be undone.
  • Undo — the entry no longer counts. It stays on the Registrations page, marked as voided, with who undid it; switch on Show voided there to see it. The next entry covers the time since the last entry that still counts. A signed entry is undone with your PIN, as a correction is. An entry with an open follow-up cannot be undone: close the follow-up on the Registrations page first.

On screens with operator names, the name picked at the top of the screen is stored as who entered, corrected or undid an entry.

Entries in the platform

All entries are on the Registrations page, next to the standstill reasons, with their workplace, form and values. Editors can void an entry there. The API lists them under registration with the filters form_uuid, placement_uuid and object_uuid.

To chart the entries or total them per day, use the Form entries datasource in a dashboard panel; for Excel and Power BI, build an OData feed on it.

Deleting a form

Delete form at the bottom of the side column takes the form off all workplaces. Its entries stay.

💡

Editors and admins build, publish and place forms.